Beatbot Sora 30 Pool Cleaner and iSkim Surface Skimmer Bundle
Two robot pool coverage for the floor, shallow areas, walls, waterline, and water surface.
The Sora 30 manages underwater debris while your selected iSkim model collects leaves and floating material from the surface. Choose the Sora 30 color and the surface skimmer configuration that best matches your pool care routine.
Best suited for
- Pools up to 3,230 square feet for Sora 30 underwater cleaning
- Shallow water areas from 8 inches deep and suitable elevated platforms
- Owners who want separate robots for underwater and surface cleaning
- In ground or above ground pools with common shapes and materials
Why choose this model
- Sora 30 delivers up to 5 hours of floor cleaning and 6,800 gallons per hour of suction
- A 5.2 liter Sora 30 basket supports substantial underwater debris collection
- iSkim provides a dedicated 9 liter surface basket with solar assisted operation
- iSkim Ultra adds advanced navigation, side brushes, voice features, and magnetic wireless charging
- Separate underwater and surface systems let each robot focus on its intended cleaning zone
Cleaning coverage and operation
- Sora 30 cleans floors, walls, waterlines, shallow water areas, and suitable elevated platforms.
- Sora 30 uses 13 sensors, including 2 ultrasonic sensors, plus 4 motors and 4 bottom rollers.
- iSkim performs random and edge surface cleaning with dual ultrasonic sensing and one click edge parking.
- iSkim Ultra uses S path surface navigation, 20 sensors, side brushes, clarifier dispensing support, voice features, and water temperature detection.
Important fit note: Sora 30 does not clean floating debris from the water surface. Its surface parking behavior is for retrieval. The selected iSkim unit performs surface cleaning. Confirm the operating requirements for both robots.
Technical specifications
| Underwater coverage |
Floor, shallow areas, suitable platforms, walls, and waterline |
| Surface coverage |
Provided by the selected iSkim or iSkim Ultra |
| Recommended pool size |
Sora 30: up to 3,230 sq ft |
| Sora 30 suction |
6,800 GPH |
| Sora 30 runtime |
Up to 5 hours of floor cleaning |
| Sora 30 filter |
5.2 L basket, 150 μm |
| Sora 30 battery |
10,000 mAh |
| Sora 30 charging |
Approximately 4.5 hours with 65 W charging |
| Surface skimmer basket |
9 L |
| iSkim solar panel |
24 W |
| Salt level |
Less than 5,000 ppm |
| Connectivity |
Beatbot app with supported Wi Fi and Bluetooth functions |
Bundle selection and operation guide
Color: Select Deep Blue or Cosmic Orange for the Sora 30 robot.
iSkim: Choose this surface skimmer for essential solar assisted cleaning, a 9 liter basket, up to 28 hours of operation without sunlight, and app connected edge parking.
iSkim Ultra: Choose this surface skimmer for S path navigation, side brushes, voice features, temperature detection, clarifier dispensing support, and magnetic wireless charging. iSkim Ultra provides approximately 18 to 20 hours of battery operation.
- Fully charge each robot on land with its supplied charging equipment, install the clean baskets, connect the Beatbot app, and select the intended cleaning mode.
- Select the appropriate cleaning mode for each unit.
- Operate each unit only within its stated depth, platform, and water chemistry limits.
- Retrieve Sora 30 after its underwater cycle and rinse both debris baskets as needed.
Care and ownership
- Remove and rinse both filter baskets after use or when debris limits water flow.
- Rinse the robots with fresh water and keep charging contacts clean and dry.
- Charge Sora 30 on land with its supplied equipment. Keep iSkim exposed to adequate sunlight for solar charging. Use adapter or magnetic wireless charging only when that charging method is supplied for the selected skimmer.
- Inspect the Sora 30 rollers, tracks, and intake and the surface skimmer paddle areas for trapped debris.
- Rinse and dry both robots before storage. Keep the robots and charging equipment in a cool, dry, protected location away from standing water and freezing conditions.
Quick troubleshooting
-
If Sora 30 does not start: Fully charge it on land, confirm the filter basket is seated correctly, and make sure the charging contacts are clean and dry.
-
If underwater pickup is reduced: Empty and rinse the Sora 30 basket, then clear the intake, rollers, and tracks.
-
If the surface skimmer changes course repeatedly: Empty its basket and clear debris from the paddle, intake, sensors, and water outlet areas. Wind, currents, and pool obstacles can affect the route.
-
If the app does not connect: Bring the relevant robot to the water surface or remove it from the pool, move the phone within connection range, and confirm Bluetooth and Wi Fi are available.
Frequently asked questions
Can both robots be used during the same pool care session?
They perform separate underwater and surface jobs. Keep swimmers out of the pool, maintain clear operating paths, place each robot within its stated depth limits, and retrieve each unit with its designated handle or parking function.
Does Sora 30 clean floating debris?
No. Sora 30 handles underwater cleaning. The selected iSkim unit handles floating surface debris.
What shallow area can Sora 30 clean?
Sora 30 cleans qualifying shallow areas from 8 inches deep and suitable platforms at least 3.3 × 3.3 feet. The approach must provide enough width, slope, and clearance for the robot to enter and exit.
Which iSkim option should I choose?
Choose iSkim for essential solar assisted surface cleaning and a longer listed operating window. Choose iSkim Ultra for its advanced route planning and added convenience features.
Water Wellness Works quick start and care guide
Keep the model specific setup, operating, care, troubleshooting, frequently asked questions, safety, and manufacturer warranty summary available in one convenient PDF.
Open the quick start and care guide (PDF)
Manufacturer warranty summary
Sora 30 includes a 2 year limited manufacturer warranty on the main unit in the United States and Canada. The selected iSkim main unit includes 3 years of coverage, while iSkim Ultra includes 2 years. Coverage begins on the original purchase date and applies to defects in materials and workmanship during normal residential use. Valid proof of purchase and the product serial number are required for service. Filter baskets and roller brushes include 3 months of coverage; clarifying agent kits are not covered. Damage caused by misuse, unauthorized repair or modification, external conditions, nonapproved parts, commercial or rental use, or purchase from an unauthorized seller is excluded. Beatbot provides and administers this manufacturer warranty. Statutory consumer rights remain unaffected.
