Airpura F600DLX in Black
Airpura F600DLX in White
Airpura F600DLX in Cream
Airpura F600DLX in Champagne Mist
Airpura F600DLX in Soft Silver
Airpura F600DLX controls
Airpura F600DLX in Black
Airpura F600DLX in White
Airpura F600DLX in Cream
Airpura F600DLX in Champagne Mist
Airpura F600DLX in Soft Silver
Airpura F600DLX controls
Trusted by 27+ Customers ★★★★★ ★★★★★ 4.6 out of 5

Airpura F600DLX Formaldehyde & VOC Air Purifier

Airpura SKU: AP-F600DLX-BLK-REG
Price
Regular price $1,19998
Regular price Sale price $1,19998
Save $-1,199.98
/
Color — Black
Carbon Filter
  • In stock, ready to ship
  • Backordered, shipping soon
Request a Price Match

Found a lower advertised price for this exact item from an eligible retailer? Send us the offer for review.

This opens an email addressed to support@waterwellnessworks.com. No personal information is collected on this page.

Airpura F600DLX Formaldehyde & VOC Air Purifier

The Airpura F600DLX Formaldehyde & VOC Air Purifier pairs a deep 26 lb enhanced carbon bed with a HEPA Barrier for airborne formaldehyde, VOCs and particles.

Best suited for: Homes, offices and workspaces prioritizing greater carbon capacity for formaldehyde and VOC concerns.

Choose your configuration

Choose Regular F600DLX enhanced carbon or Super Gas 600DLX. The selected carbon blend determines chemical filtration. Both options include a HEPA Barrier, which has a different particle rating from True HEPA.

F600DLX specifications

Suggested room size Up to 2,000 sq. ft. at 2 air changes per hour with 8 foot ceilings
Airflow 560 CFM free flow
Particle filter HEPA Barrier; 95% efficient at 1 micron
Carbon filter 26 lb enhanced carbon in a 3 inch bed; Regular F600DLX uses potassium permanganate and coconut shell carbon
Prefilter Vacuumable poly prefilter
Dimensions 23 inches high × 15 inches wide
Controls and housing Variable speed; powder coated steel; casters
Colors Black, White, Cream, Champagne Mist and Soft Silver

Suggested coverage depends on room height, layout, airflow setting and indoor conditions. Use appropriate ventilation and source control alongside air cleaning.

Getting started and everyday use

  1. Inspect the exterior for shipping damage and wipe away packaging dust with a damp cloth.
  2. Place upright with the intake and outlet unobstructed. Keep the control switched off while plugging into a grounded outlet matching the voltage on the unit’s label.
  3. Switch on and run at maximum speed for at least 30 minutes, then select your operating speed.
  4. For regular air quality maintenance, run continuously at a low speed and adjust as conditions require.

Keep indoor relative humidity around 40%. Excessive humidity can affect carbon performance. Keep a dehumidifier at least 6 feet from the purifier.

Filter maintenance

Prefilter Vacuum monthly or more often as needed; replace after 12 months
Carbon filter Replace about every 2 years
HEPA Barrier Replace about every 3 to 5 years

Replacement intervals are guidelines from the current user manual. Actual filter life depends on use and indoor conditions.

Cleaning and filter replacement

Switch off and unplug before cleaning. Use your vacuum’s brush attachment to clean the prefilter through the outside grille, moving slowly around the mesh surface. Clean monthly or more often when needed.

Replacing the carbon and particle filters
  1. Switch off and unplug. Support the purifier securely while turning it over to access its base.
  2. Remove the four retaining screws, lift off the bottom cover and remove the upper felt gasket. Keep the screws and gasket for reassembly.
  3. Lift out the filters being replaced, noting their positions. Position the prefilter against the filter chamber wall and place the lower felt gasket flat at the bottom.
  4. Unfold the filter slider, roll it into a spiral and insert it inside the prefilter. Open its top slightly to form a funnel.
  5. Hold the replacement carbon canister straight and lower it into the funnel. Pull the slider up with both hands so the canister settles at the bottom, then remove and retain the slider.
  6. Slide the correct particle filter into the center of the chamber.
  7. Replace the upper felt gasket. Align the indentation in the bottom cover with the center of the particle filter, replace and tighten all four screws, then return the purifier upright.
  8. Keep the switch off while reconnecting power.

Electrical safety certification

The F600DLX user manual lists ETL certification number 3067330 and the electrical safety standards UL 507 and CSA C22.2 #113.

Manual and product video

Download the F600DLX user manual. Setup and routine maintenance instructions are included above for easy access.

Airpura’s air purifier mist demonstration. This is a general demonstration, not a formaldehyde reduction test.
Shipping, Returns, & Warranties

Orders Processing: Our chosen couriers, including USPS, UPS, and FedEx, consistently facilitate the delivery of your items from our warehouse. Please note that processing times may vary depending on the brand. All orders are processed and shipped within 1 - 5 business days.

Order Confirmation: As soon as you place your order, you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your card for the purchase.

30 Day Returns: If your order arrives damaged, we will exchange you a replacement. For more details, visit our Refund Policy Page.

View our Full Brand Warranty Page Here
Recently viewed