Found a lower advertised price for this exact item from an eligible retailer? Send us the offer for review.
Verified Customer Reviews
★★★★★4.8 out of 5from 4 product reviews
★★★★★
Sleek efficient
Axie
★★★★★
Great household air filter
Alicia Allen
Airpura C600DLX chemical and VOC air purifier with a 26 lb carbon filter
The Airpura C600DLX is a heavy-duty, floor-standing air purifier designed for indoor spaces where chemical gases, volatile organic compounds (VOCs), solvents, fumes, and persistent odors are the main concern. Its extra-deep carbon stage is paired with a prefilter and HEPA Barrier for broad gas-phase filtration with supplementary particle control.
A strong fit for: recently renovated rooms, workshops, offices, homes near industrial activity, spaces affected by product off-gassing, and households seeking enhanced filtration for chemical sensitivities.
What this air purifier is used for
The C600DLX prioritizes adsorption of a wide range of airborne chemicals and odors. Airpura equips the standard configuration with 26 lb of impregnated activated carbon blended with potassium iodide and coconut-shell carbon. The HEPA Barrier provides secondary filtration for larger airborne particles. This purifier supports indoor air-quality management but does not replace source control, ventilation, protective equipment, or professional environmental assessment.
Where to place it
Place the purifier upright on the floor in the room where chemical odors or off-gassing are most noticeable. Keep the lower intake and 360-degree outlet clear of walls, curtains, and furniture. Built-in casters make it easier to reposition. Disconnect power before cleaning or filter service.
How the filtration system works
1. Poly prefilter Captures larger debris before it reaches the main media.
2. Deep carbon bed 26 lb of impregnated activated carbon adsorbs many gases, VOCs, chemicals, and odors.
3. HEPA Barrier Captures 95% of airborne particles measuring 1 micron or larger.
Airpura C600DLX specifications
Suggested room size
Up to 2,000 sq. ft. at 2 air changes per hour with 8-foot ceilings
HEPA Barrier; 95% efficient for particles 1 micron or larger
Dimensions
23 in. high × 15 in. wide
Housing and mobility
Powder-coated steel housing with casters
Electrical configuration
120V distributor configuration
Ozone emissions
No
Filter maintenance
Component
Airpura replacement guidance
Poly prefilter
Vacuum as needed; replace about every 12 months
Impregnated carbon filter
Replace about every 24 months
HEPA Barrier
Replace about every 12 months
Actual filter life varies with chemical load, use, and indoor conditions.
Getting started and everyday use
Inspect the exterior for shipping damage and wipe away packaging dust with a damp cloth.
Keep the control switched off while plugging into a grounded outlet matching the voltage on your unit’s label.
Switch on and run at maximum for at least 30 minutes, then choose the operating speed.
For regular air quality maintenance, use continuous operation at a low speed. Adjust the speed as conditions require.
Keep indoor relative humidity at 40% or less to support carbon performance. When using a dehumidifier, keep it at least 6 feet from the purifier.
Cleaning and filter replacement
Switch off and unplug before cleaning. Use your vacuum’s brush attachment to clean the prefilter through the outside grille, moving slowly around the mesh surface. Clean monthly or more often when needed.
Replacing the carbon and particle filters
Switch off and unplug the purifier. Support the unit securely while turning it over to access the base.
Remove the four retaining screws, lift off the bottom cover and set aside the upper felt gasket. Keep the screws and gaskets for reassembly.
Remove the filters being replaced, noting the positions of the remaining filters and gaskets.
Place the lower felt gasket flat at the bottom of the chamber and position the outer prefilter or TarBarrier against the chamber wall.
Roll the filter slider into a spiral, insert it inside the outer filter and open its top into a slight funnel.
Hold the correct carbon canister straight and lower it through the slider. Lift the slider out with both hands, allowing the canister to settle at the bottom. Remove and retain the slider.
Insert the correct True HEPA or HEPA Barrier assembly inside the carbon canister. Retain any fitted particle wrap and its securing bands in their original positions.
Replace the upper felt gasket. Align the indentation in the bottom cover with the center of the particle filter, refit the cover and tighten all four screws.
Return the purifier upright. Reconnect power only after the filter chamber is closed, with the control switched off before plugging in.
The linked manual remains available below for optional illustrated reference.
Orders Processing: Our chosen couriers, including USPS, UPS, and FedEx, consistently facilitate the delivery of your items from our warehouse. Please note that processing times may vary depending on the brand. All orders are processed and shipped within 1 - 5 business days.
Order Confirmation: As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your card for the purchase.
30 Day Returns: If your order arrives damaged, we will exchange you a replacement. For more details, visit our Refund Policy Page.
